Linear actuator with piezo motor; piezoelectric inertia drive; 35 mm travel range; 7 N feed force; 5 mm/s maximum velocity; 2 m cable length
N-422 Linear Actuator with Piezo Motor
Inexpensive and Easy to Integrate
- Easy integration: Two mounting versions
- Silent: Operating frequency to >20 kHz
- Velocity over 5 mm/s
- Submicron resolution
- Holding force to 10 N
Piezo motor direct drive
OEM actuator without position sensor. Continuous motion with step frequencies in the ultrasound range. Mounting via thread on the front or on a level surface perpendicular to the direction of motion.
Inertia drive
Self-locking, no heat generation at rest. Noiseless drive with operating frequencies over 20 kHz. Resolution in step mode approx. 300 nm, open loop.
Application fields
Industry and research. Alignment of optical elements, micromanipulation, biotechnology, cell manipulation, medical technology.
Specifications
Specifications
Motion | N-422.50 | Tolerance |
---|---|---|
Active axes | X | |
Travel range in X | 35 mm | |
Maximum velocity in X, unloaded | 5 mm/s | min. |
Maximum step frequency | 20 kHz | max. |
Step size in full step mode | 300 nm | typ. |
Drive Properties | N-422.50 | Tolerance |
Operating voltage | 48 | max. |
Drive type | Piezoelectric inertia drive | |
Maximum power consumption | 15 (actuator), 30 (driver input) W | nominal |
Drive force in X | 7 N | max. |
Mechanical Properties | N-422.50 | Tolerance |
Stiffness in X | > 4 N/µm | ±20 % |
Holding force in X, passive | 10 N | min. |
Overall mass | 25 g | ±5 % |
Material | Stainless steel; ceramic (runner) | |
Miscellaneous | N-422.50 | Tolerance |
Operating temperature range | 0 to 50 °C | |
Connector | LEMO FFA.0S.303.CLAC27 | |
Cable length | 2 m | +30 / -0 mm |
Recommended controllers / drivers | E-872.401 |
Maximum step frequency and maximum velocity depending on the drive electronics.
Ask about customized versions.
Downloads
Datasheet
Documentation
User Manual MP116
N-422 PIShift OEM Linear Drive
3D Models
N-422 3-D model
Quote / Order
Ask for a free quote on quantities required, prices, and lead times or describe your desired modification.